Harman Kardon DPR 1001 Service Manual

Also see for DPR 1001: Brochure Brochure & specs Brochure & specs Brochure Brochure

Contents

Harman Kardon DPR 1001 Service Manual Manual pdf 14 page image

Power Indicator: This LED turns red when theunit is in the Standby mode to signal that the unit isready to be turned on. When the unit is in operation,the indicator will turn green.2 Standby/On Button: When the Main PowerSwitch I is “ON,” press this button to turn on theDPR 1001; press it again to turn the unit off. ThePower Indicator will turn green when theunit is on.NOTE: The Main Power Switch ( must be turnedon before this button will operate.Surround Mode Selector: Press this button tochoose a surround processing format category byscrolling through the list of available formats asindicated in the Surround Mode Indicators H.These format categories are: Dolby surround modes,DTS Digital modes, DTS Neo:6 modes, Logic 7modes, DSP modes and Stereo modes. Once youhave selected a format category, use the SurroundSelect Button 3 to choose a specific mode withinthe overall category.3 Surround Select Button: After choosing asurround processing format category by using theSurround Mode Selector , press this button toscroll through the list of available modes for that for-mat category. For example, to select the 7.1 Logic 7Cinema mode, press the Surround Mode Selectoruntil the indicator next to Logic 7 H is lit. Thenpress the Surround Select Button 3 to scrollthrough the available choices until the desired modeappears in the Main Information Display F. (Formore information see page 26.)4 AM/FM Selector: Pressing this button will auto-matically switch the DPR 1001 to the Tuner mode.Pressing it again will switch between the AM and FMfrequency bands. (See page 28 for more informationon the tuner.)5 Input Source Selector: Press this button tochange the input by scrolling up or down through thelist of input sources.6 Tuning Mode Selector: This button is used toswitch back and forth between the Auto and Manualtuning modes. In Auto mode, you may use the TuningSelector 7 to scan through stations with an accept-able signal. In Manual mode, you may use the TuningSelector 7 to step through one frequency incrementat a time.13 56 8!12 479 )@ #% $^&*( Ó ÔÒÚ Power Indicator1 Standby/On ButtonSurround Mode Selector3 Surround Select Button4 AM/FM Selector5 Input Source Selector6 Tuning Mode Selector7 Tuning Selector8 Preset Station Selector9 ¤ Button! Set ButtonB ⁄ ButtonC DoorD Volume ControlE System Configuration IndicatorsF Main Information DisplayG Input IndicatorsH Surround Mode IndicatorsI Main Power SwitchJ Headphone JackK Digital Optical 3 InputL Input/Output Status IndicatorsM Digital Coax 3 JackN Video 4 Input/Output JacksNOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may bedownloaded from the Product Support section at www.harmankardon.com.DPR1001 harman/kardonFRONT PANEL CONTROLS