28Playing CDsCompatibility of DiscsBefore you load a disc, make sure that it is compatible with the player.Note that the following discs CANNOT be used with this player.• Laserdisc• CD-I, CD-ROM, CD-R, DVD-ROM, MP3, VCD• MiniDisc• CD-RW (erasable CD) with low reflectivity, those with high reflectivitywill be accepted and played (if finalized, see also page 3).Using the Banner DisplayAs soon as a CD is played the Banner Display will appear automatically.To delete it from screen, press STATUS or CLEAR on the remote, to re-access it, while the CD is playing, press STATUS again. The BannerDisplay cannot be accessed in Stop mode, only in Pause or Play mode. Inthe Display some of the playback features are illustrated with an icon. Toaccess a feature, press the appropriate ARROW on the remote to high-light the icon. Each feature is described in the following pages.Note:To see the Info Display, you must turn on your TV and tune it to theappropriate Video Input Channel.To Load and Play an Audio CDMake sure that you have properly connected the DVD player1. Press OPEN/CLOSE on the front of the DVD player or on the remote(the disc tray opens).2. Place a disc gently into the tray with the disc’s label facing up.3. Press PLAY to close the disc tray.The DVD player reads the disc’s table of contents and the disc startsto play.4. To search forward or reverse through the track, press SEARCH (for-ward/reverse) on the remote or on the front panel. To pause play, pressPAUSE on the remote or PLAY/PAUSE on the front panel. To release thepause, press PAUSE or PLAY on remote or PLAY/PAUSE on front panelagain.5. Press STOP to stop playback.Audio CD Playback FeaturesWhen playing audio CDs, your DVD player has the same features as a CD player, including track skip, repeat play and programmed playback. The on-screen Info Display, appearing when REPEAT or RANDOM is pressed (see page 30), and the Banner Display shown below, appearing automaticallywhen the CD is played, let you choose various playback features.INTRO ICON