Harman Kardon DVD 27 Owner's Manual

Also see for DVD 27: Brochure Brochure Brochure Reference guide Connection guide

Harman Kardon DVD 27 Owner's Manual Manual pdf 12 page image

REAR-PANEL CONNECTIONS10 2345678¡ Remote Control Output™ Remote Control Input£ Optical Digital Audio Output¢ Coaxial Digital Audio Output∞ Component Video Outputs§ Composite Video Output¶ S-Video Output• Analog Audio Outputsª AC Power Cord¡ Remote Control Output: Connect this jack to theinfrared (IR) input jack of another compatible remote-controlled product to have the built-in Remote Sensoron the DVD 27 provide IR signals to other compatibleproducts.™ Remote Control Input: Connect the output of aremote infrared sensor, or the remote control outputof another compatible product, to this jack. This willenable the remote control to operate even when thefront-panel Remote Sensor on the DVD 27 is blocked.This jack may also be used with compatible IR remotecontrol-based automation systems.£ Optical Digital Audio Output: Connect thisjack to the optical digital input of an A/V receiver orsurround processor for Dolby Digital, DTS or PCMaudio playback.¢ Coaxial Digital Audio Output: Connect this jackto the coaxial digital input of an A/V receiver or sur-round processor for Dolby Digital, DTS or PCM audioplayback.NOTES:• Connect either the Optical Digital Audio Output£ or the Coaxial Digital Audio Output ¢ to acorresponding digital audio input on your receiver orprocessor, but not both.• The coaxial digital output should only be connectedto a digital input. Even though it is the same RCA-type connector as standard analog audio connec-tions, DO NOT connect it to a conventional analoginput jack.∞ Component Video Outputs: These outputs carrythe component video signals for connection to displaymonitors with component video inputs. For standardanalog TVs or projectors with inputs marked Y/Pr/Pbor Y/Cr/Cb, connect these outputs to the correspon-ding inputs. If you have a high-definition televisionor projector that is compatible with high-scan-rateprogressive video (480p or better), connect thesejacks to the HD component inputs. If you are using aprogressive scan display device, PROGRESSIVEmust be selected in the Video menu in order to takeadvantage of the progressive scan circuitry. See the“Scan Type” section on page 20 for more informationon progressive scan video.IMPORTANT: These jacks should NOT be connectedto standard composite video inputs.§ Composite Video Output: Connect this jack tothe video input on a television or video projector, or toa video input on an A/V receiver or processor if youare using that type of device for video input switching.¶ S-Video Output: Connect this jack to the S-videoinput on a television or video projector, or to an S-videoinput on an A/V receiver or processor if you are usingthat type of device for S-video input switching.• Analog Audio Outputs: Connect these jacks toan audio input on an A/V receiver, surround processoror your television for analog audio playback.ª AC Power Cord: Connect this plug to an AC out-let. If the outlet is controlled by a switch, make certainthat it is in the ON position.NOTE: You’ll find more details about all audio/videoconnections under Setup and Connections on thefollowing pages.12 REAR-PANEL CONNECTIONSNOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Supportsection for this product at www.harmankardon.com.