14 REPEAT PLAY OPERATIONRepeat Play OperationRepeat PlayThe HD 755’s programming system enables youto repeat either a single track, the entire disc(respectively all programmed tracks) or aspecially programmed passage that you select.Repeat One TrackTo repeat the track in play, press the Repeatbutton !5 once. When the unit is in Stopmode, press Repeat once, select the track to berepeated with the Skip or Numeric buttons asdescribed on page 10, and press Play 4 9.The REPEAT and 1 indicators will light and thetrack will continue to play over and over againcontinuously. If the track is changed by pressingthe Skip buttons 7 7 while the Repeat func-tion is in use, the newly selected track will berepeated. To stop the repeat play, press theStop button 5 A or press the Repeat but-ton !5 until the REPEAT indicator goes out.Repeat All TracksTo repeat all of the tracks on a disc, press theRepeat button !5 until the REPEAT andALL indicators light up. When you see these indi-cators, the entire disc or all programmed trackswill play through to the end, and then startagain from the beginning. The disc will playcontinually until the Stop button 5 A ispressed.Repeat A–BThe HD 755 may be programmed to repeat anysection within a track, or a complete passage orprogram that includes material in a series oftracks.To program the unit for A–B play, first locate thepoint on the disc where you wish to begin therepeated section. At that point, press the RepeatA–B button 6. The REPEAT indicators will lightin the Information Display and an A– indica-tor to show that the program process hasstarted. Let the disc continue to play or press theSearch — button 6 8 or Skip fl·button 7 7 on the front or remote until youhave reached the end of the section to berepeated. When the end point is reached, pressthe Repeat A–B button 6 again. Note thatthe REPEAT and A–B indicators will now beilluminated.Once the Repeat A–B button 6 is pressedfor the second time to complete the program-ming, the HD 755 will automatically go to thebeginning of the selected passage and continueto play the section over and over.To resume normal play press the Repeat A–Bbutton 6 again. The REPEAT and A–B indica-tors will go out, and the rest of the disc will playnormally.IMPORTANT Note: Tracks programmed asdescribed before in chapter ”Programmed Play”can be repeated too: When you press Repeat! 6 once after a program is created (thePROGRAM indicator must be lit, otherwise pressProgram) and the program step indicationP - 01 is not lit (otherwise press Stop once),the REPEAT 1 indicator will light and the trackcurrently selected or playing will be repeatedcontinuously. If Repeat is pressed twice REPEATALL will be displayed, all programmed tracks willbe played subsequently and the sequence will berepeated continuously until Stop is pressed.