Harman Kardon HS 210 User Manual

Also see for HS 210: Service manual

Harman Kardon HS 210 User Manual Manual pdf 24 page image

2424Radio Station OptionsTo show options for a highlighted station while the HS 280/HS 210 displays the radio-station list, press the right cursor buttonHighlight the option you want, then press the Enter buttonSearch Up: Searches for the next receivable station above the highlighted stationSearch Down: Searches for the next receivable station below the highlightedstationStep Up: Changes the highlighted station frequency up by 0 1MHz each time youpress the Enter buttonStep Down: Changes the highlighted station frequency down by 0 1MHz each timeyou press the Enter buttonCapture Name: Captures the highlighted station’s name and assigns it to thestation’s listing (if the station is broadcasting the data)New: Creates a copy of the current preset (with the name “New”)Rename: Lets you use the remote’s numeric buttons to assign your own name to thehighlighted stationDelete: Deletes the highlighted station from the listNOTE: To delete all of the stations from the list:Press the Activity button1Highlight Radio and press the right cursor button2Select Delete All and press the Enter button3Add to Bookmark: Adds the highlighted station to your list of Bookmarks (seeBookmarks, on page 21, for more information)Listening to Audio SourcesIf you used the Settings menu to assign input connections to the remote’s TV andVideo buttons, the HS 280/HS 210 will automatically switch to those connectionsevery time you press the remote’s TV or Video button See Settings Menu: AudioSettings: TV Audio Input and Video Audio Input, on page 19 and 20, for moreinformationYou can also manually select an audio component that you connected to any of theHS 280/HS 210’s line inputs or digital inputs:Press the Activity button1Select Audio Inputs The input-connection list will appear2Highlight the input to which you connected the component and press the Enter3buttonNOTE: If you connected your TV to the receiver using the SCART connection, theHS 280/HS 210 will automatically switch to the SCART input when the TV is turned onSee Audio Settings/TV Audio Input, on page 19If an audio input is selected when you put the receiver in the standby mode, it willautomatically be the selected input the next time you turn the receiver onTo make it easier to identify which component is connected to which input, you canrename any of the inputs On the input connection list screen, (see above), highlightthe input you want to rename, and press the right cursor button (see Cursor Controls,page 10) The options menu will appearSelect Rename, and use the remote’s numeric buttons to enter a different name forany of the inputsPlaying Files from USB DevicesThe HS 280/HS 210 can display JPEG picture files, play MP3 (up to 320kbps bit rate)audio files and show AVI, MP4 (up to 4Mbps bitrate) format video files stored on aUSB device To access files on a device connected to one of the HS 280/HS 210’s USBports:Press the USB button on the remote•– or –Press the Activity button on the remote and select USB If you have more than one•USB device connected, both device names will appear