Harman Kardon HS 210 User Manual

Also see for HS 210: Service manual

Harman Kardon HS 210 User Manual Manual pdf 8 page image

88MODEL: HS 2X0SO/230SpeakerOutputsCoaxialDigitalInputsOpticalDigitalInputsSubwooferOutputCoaxialDigitalOutputAC PowerInputSubTriggerOutputLineOutputsLine 2InputsSCARTConnectionFMAntennaConnectionLine 1InputsEthernetPortUSBPortHDMIOutputCompositeVideoOutputS-videoOutputRemote ControlInput/OutputReceiver Rear-Panel ConnectionsAC PowerInput SpeakerOutputsCoaxialDigitalOutputEthernetPortUSBPort HDMIOutputRemote ControlInput/OutputCompositeVideoOutputS-VideoOutputCoaxialDigitalInputsOpticalDigitalInputsSubTriggerOutputSubwooferOutputLineOutputsLine 1InputsLine 2Inputs SCARTConnection FMAntennaConnectionSee the Connections section, on page 14, for detailed information about makingconnectionsAC Power Input: After you have made and confirmed all other connections, plug thesupplied AC power cord into this input and into an unswitched AC outletSpeaker Outputs: Use the speaker wires supplied with the SAT TS60 speakers toconnect the satellite speakers to the proper terminalsBe sure to connect the positive (+, colored red) connector on the speaker to thepositive (+, colored red and white) connector on the HS 280/HS 210, and thenegative (– , colored black) connectors on the speakers to the negative (–, coloredblack) connectors on the HS 280/HS 210 See Connecting the Satellite Speakers, onpage 14, for more information about making connectionsCoaxial Digital Inputs: Connect the coaxial digital output of an audio-only sourcecomponent here The signal may be a Dolby Digital bitstream or a standard PCMdigital audio bitstreamNOTE: Use only one type of digital connection for each source componentOptical Digital Inputs: Connect the optical digital output of an audio-only sourcecomponent here The signal may be a Dolby Digital bitstream or a standard PCMdigital audio bitstreamNOTE: Use only one type of digital connection for each source componentCoaxial Digital Output: Connect this output to the coaxial digital input of a digitalrecording device such as a CD-R or MiniDisc recorderSub Trigger Output: Use the black mini-cable connector of the suppliedcombination LFE and trigger cable to connect this jack to the HKTS200SUBsubwoofer’s External Trigger Input See Connecting the Subwoofer, on page 15, formore details about making connectionsWhenever the HS 280/HS 210 is turned on, it will send a trigger signal that will turnthe subwoofer’s amplifier on Turning the HS 280/HS 210 off removes the triggersignal, and the subwoofer’s amplifier will turn off (This change will occur even whenthe subwoofer’s Power On Mode switch – see page 9 – is in the Auto position )Subwoofer Output: Use the LFE (purple) connector of the supplied combination LFEand trigger cable to connect this jack to the HKTS200SUB subwoofer’s Line-Level InLFE jack See Connecting the Subwoofer, on page 15, for more details about makingconnectionsEthernet Port: Connect this port to your local area network (LAN) using a CAT 5 RJ45network cable See Connecting to a Local Area Network (LAN), on page 17, for detailsLine Outputs: Use the Line Outputs to connect to an audio-only recorder, such as aCD-R recorder or tape deckUSB 2.0 Port: Gently insert a flash drive, card reader, digital camera or other USBdevice, or a USB Standard-A cable connected to a USB device, to this portIMPORTANT: DO NOT connect a PC or other USB host/controller to this port, or youmay damage both the HS 280/HS 210 and the other device Orient the device’s plugso it fits all the way into the HS 280/HS 210’s USB connector You may insert or removethe device at any time – there is no installation or ejection procedureThe HS 280/HS 210 can display JPEG-format still-image files stored on the device andcan also play MP3 and Windows Media® Audio (WMA) files and MPEG4 and AVI videofiles that are stored on the deviceLine 1 Input/Line 2 Inputs: Use these inputs to connect to an audio-only sourcecomponent (such as a tape deck) Do not connect a turntable to these jacks without aphono preampHDMI Output (HDMI version 1.2): If your video display is HDMI-capable, connectit to the HS 280/HS 210’s HDMI output for improved video performance Since theHDMI cable transmits both video and audio to the video display, we recommend thatyou disable your display’s HDMI audio function to take full advantage of the HS 280/HS 210 system’s superior audio performance (See page 19)IMPORTANT: The HS 280/HS 210 is in compliance with HDCP (High-Definition CopyProtection) A video display must also be HDCP-compliant to be used with the HS 280/HS 210’s HDMI output For best results, we do not recommend HDMI connections inexcess of ten feet without a repeater If your video display has a DVI input, you mayuse an optional HDMI-to-DVI cable or adapter for the video connection to the display(The DVI connection is video-only )