Harman Kardon HS 300 Owner's Manual

Also see for HS 300: Brochure & specs Owner's manual Owner's manual Service manual

Harman Kardon HS 300 Owner's Manual Manual pdf 33 page image

33INITIAL SETUPStep Six – Configure SourcesThis is the last step in the configuration process. It is necessary sothat the correct inputs are selected as you use various sources withyour HS 300.NOTE: If you have not connected any devices to the TV or D-INinput jacks on the HS 300, then you may skip this step. You arenow ready to begin enjoying the finest in home entertainmentusing your HS 300 system. Turn to the Operation section tolearn how to make the most of the many features of theHS 300.Select the TV, AUX or D-IN source either by pressing its Source Selectoron the remote (see Figure 47), or by pressing the OSD button andusing the ‹/› Buttons to select the source from the list at the top ofthe screen. See Figure 48 for the screen for the TV source.Figure 47 – Source SelectorsFigure 48 – TV Source MenuPress the Enter Button to access the TV menu settings, and use the¤ Button to select the Audio Input setting. Press the Enter Buttonto display the input options: Coaxial or Optical (digital audio) or Line(analog audio). Use the ‹/› buttons to select the input to whichyou connected your TV’s audio output, and press the Enter Button.You may also select a surround mode for this source at the Audiosetting line, and you may adjust the volume level for this source at theLevel Adjustment setting line, but it is not necessary to make theseadjustments now. These settings only apply to the TV source.To configure the D-IN (Digital Input) source, use the Navigation Buttonsto highlight D-IN on the top line, and press the Enter Button to accessthe settings for the D-IN source. See Figure 49.Figure 49 – Digital Input (D-IN) Source MenuUse the ¤ Button to select the Digital Input setting line, and press theEnter Button to view the options of Coaxial or Optical digital audio input.Select the input to which you have connected the source device youwish to listen to, and press the Enter Button.You may also select a surround mode for this source at the Audiosetting line, and you may adjust the volume level for this source at theLevel Adjustment setting line, but it is not necessary to make theseadjustments now. These settings only apply to the D-IN source.You are now ready to begin enjoying the finest in home entertainmentwith your HS 300 home theater system!