IAI RCP2 Operating Manual

Also see for ROBO Cylinder RCP2 Series: Operating manual First step guide Quick start guide First step guide Operating manual

IAI RCP2 Operating Manual Manual pdf 20 page image

85. Transporting and Handling5.1 Handling the Actuator5.1.1 Handling the Packed UnitUnless otherwise specified, each actuator (axis) is shipped individually. Please make sure that the shippingbox is not dropped or subjected to strong impact during transport.• Operators should not carry heavy shipping boxes by themselves.• If the shipping box is left standing, it should be in a horizontal position.• Do not climb on top of the shipping box.• Do not place heavy objects which may deform the shipping box or objects with concentrated loads on top ofthe box.5.1.2 Handling the Actuator after It is UnpackedLift the actuator up by the base to remove it from the packing.• When carrying the actuator, make sure not to bump it. Take particular care with the front cover and motorcover.• Do not exert excessive force on any part of the actuator.• Be careful not to cause the cables to receive a tensile force.• Be careful when handling the stainless sheetThe stainless sheet is designed very thin (thickness: 0.1mm) in order to ensure flexibility. Therefore, thestainless sheet is easily dented or scratched. Once dented or scratched, the stainless sheet may break duringuse.Warning: Do not press the sheetdirectly with hands.*Please refer to Section 4 above for the names of the actuator parts.