IAI RCP2 Operating Manual

Also see for ROBO Cylinder RCP2 Series: Operating manual First step guide Quick start guide First step guide Operating manual

IAI RCP2 Operating Manual Manual pdf 33 page image

2111. Maintenance11.1 Maintenance SchedulePerform maintenance work according to the schedule below.The schedule is set assuming eight hours of operation a day. When the operation time is long such as a24-hour operation, shorten the maintenance intervals as needed.Visual inspection Check interior Grease supplyStart of operation ○After 1 month of operation ○After 6 months of operation ○ ○After 1 year of operation ○ ○ ○Every 6 months thereafter ○Every 1 year ○ ○ ○11.2 Visual Inspection of the Machine ExteriorCheck the following items when carrying out visual inspection.Body Loose mounting bolts?Cables Damage to cables or connection to connector box?Stainless sheet Damage or foreign deposit?General Unusual noise or vibrations?11.3 Cleaning• Clean the exterior as needed.• Wipe off dirt with a soft cloth.• Do not use strong compressed air on the actuator as this may force dust into the crevices.• Do not use petroleum-based solvents on plastic parts or painted surfaces since such solvents damage them.• If the unit is badly soiled, apply a neutral detergent or alcohol to a soft cloth, and wipe gently.