IBM 2179 Hardware Maintenance Manual

Also see for 2179: User guide Technical information manual User guide Podręcznik użytkownika

Contents

Diagnostic Error Code FRU/Action018-195-XXXPCI Card Test aborted by user 1. PCI card2. Information3. Re-start the test, if necessary018-196-XXXPCI Card test halt, error threshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file018-197-XXXPCI Card test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test018-198-XXXPCI Card test aborted 1. Make sure the component that is calledout is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section018-199-XXXPCI Card test failed, cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test018-250-XXXPCI Card Services error 1. PCI card2. Riser card, if installed3. System board020-000-XXXPCI Interface Test Passed 1. No action020-0XX-XXXPCI Interface error 1. PCI card2. Riser card, if installed3. System board020-195-XXXPCI Test aborted by user 1. Information2. Re-start the test, if necessary020-196-XXXPCI test halt, error threshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file020-197-XXXPCI test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test020-198-XXXPCI test aborted 1. If a component is called out, make sureit is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section46 Hardware Maintenance Manual