Chapter 3. Operating and caring for your computer 19Inserting and removing a discTo insert a disc:1. Press the device bay release button to lower the device bay. See “Accessing theoptical drive” on page 17.2. With the computer turned on, press the eject button.3. Place the disc in the tray with the label facing up 1.4. Close the tray by gently pushing the tray closed. When the tray is closed, theindicator light on the front of the drive will activate to indicate that the driveis in use.To remove a disc:1. Press the device bay release button to lower the device bay. See “Accessing theoptical drive” on page 17.2. With the computer turned on, press the eject button. When the tray slides out,carefully remove the disk.3. Close the tray by gently pushing the tray closed.Note: If the tray does not slide out when you press the eject button, insert theend of an opened paper clip into the emergency-eject hole located at thefront of the optical drive.
