Chapter 4. Using the IBM Setup Utility program 29When working with the program menu, you must use the keyboard. Thefollowing table shows the keys used to accomplish various tasks.Note: Active keys are displayed at the bottom of each screen; not all of thesekeys are active on every menu.Exiting from the IBM Setup Utility programWhen you finish viewing or changing settings, press Esc to go to the Exit menu(you might have to press Esc several times). If you want to save the new settings,select Save Settings before you exit. Otherwise, your changes will not be saved.Using passwordsYou can use passwords to provide security for your computer and data. There aretwo kinds of passwords: a user password and an administrator password. You donot have to set a password of either type to use your computer. However, if youdecide to set either one, read the following sections.User passwordThe user password feature deters unauthorized persons from gaining access toyour computer.Use these arrow keys to move among menu items until the item you want ishighlighted.Use these arrow keys to display and toggle among choices for a menu item.Enter Press this key to select a highlighted menu item.Esc Press this key to exit from a menu after viewing or making changes to the settingsin the menu.+ Use this key in some menus to increase the numerical value of a setting.− Use this key (the minus or hyphen key) in some menus to decrease the numericalvalue of a setting.0 - 9 Use the number keys in some menus to change the numerical value of a setting.F1 Press this key for help on a selected menu item.F9 Press this key if you changed and saved the setting of a selected menu item andyou want to restore the setting that was active before you made the change.F10 Press this key to return the setting of a selected menu item to a default value.
