USB cableUSB cablerelease leverThere are release levers on the Ethernet and systems management connectors. Todisconnect a cable from one of these connectors, pull up on the lever to release thecable.Ethernet speed LEDEthernet activity LEDEthernet portEthernet cablerelease leverUpdating the server configurationWhen you start the server for the first time after you add or remove an internaloption or external device, you might receive a message that the configuration haschanged. The Configuration/Setup Utility program starts automatically so that youcan save the new configuration settings.Some options have device drivers that you must install. For information aboutinstalling device drivers, see the documentation that comes with each option.If the server has an optional RAID adapter and you have installed or removed ahard disk drive, see the documentation that comes with the RAID adapter forinformation about reconfiguring the disk arrays.If you have installed a Remote Supervisor Adapter ll SlimLine to manage the serverremotely, see the Remote Supervisor Adapter ll SlimLine User’s Guide, whichcomes with the adapter, for information about setting up, configuring, and using theadapter.For information about configuring the integrated Gigabit Ethernet controller, see“Configuring the Gigabit Ethernet controller” on page 70.Chapter 2. Installing options 47
