IBM 425162U Installation And User Manual

Contents

Table 1. Features and specifications (continued)RAID controllers:v A ServeRAID-BR10il v2 SAS/SATAadapter that provides RAID levels 0, 1,and 1E (comes standard on somehot-swap SAS and hot-swap SATAmodels).v An optional ServeRAID-MR10iSAS/SATA adapter that provides RAIDlevels 0, 1, 5, 6, and 10 can be ordered.v An optional ServeRAID-MR10is VAULTSAS/SATA adapter with an encryption1078 DE chip set that provides RAIDlevels 0, 1, 5, 6, and 10 can be ordered.Acoustical noise emissions:v Sound power, idling: 6.5 bels maximumv Sound power, operating: 6.5 belsmaximumEnvironment:v Air temperature:– Server on: 10°C to 35°C (50.0°F to95.0°F); altitude: 0 to 914.4 m (3000ft)– Server on: 10°C to 32°C (50.0°F to89.6°F); altitude: 914.4 m (3000 ft) to2133.6 m (7000.0 ft)– Server off: 10°C to 43°C(50°F to 109.4°F); maximum altitude:2133.6 m (7000.0 ft)– Shipping: -40°C to 60°C(-104°F to 140°F)v Humidity:– Server on: 8% to 80%– Server off: 8% to 80%v Particulate contamination:Attention: Airborne particulates andreactive gases acting alone or incombination with other environmentalfactors such as humidity or temperaturemight pose a risk to the server. Forinformation about the limits forparticulates and gases, see “Particulatecontamination” on page 79.Video controller (integrated into IMM):v Matrox G200v SVGA compatible video controllerv Avocent Digital Video Compressionv Video memory is not expandableNote: The maximum video resolution is1280 x 1024Size:v Height: 43 mm (1.69 inches, 1 U)v Depth: 559 mm (22 inches)v Width: 440 mm (17.32 inches)v Maximum weight: 12.7 kg (28 lb)Heat output:Approximate heat output:v Minimum configuration: 171 BTU perhour (50 watts)v Maximum configuration: 1024 BTU perhour (300 watts)Electrical input:v Sine-wave input (50 / 60 Hz) requiredv Input voltage low range:– Minimum: 100 V ac– Maximum: 127 V acv Input voltage high range:– Minimum: 200 V ac– Maximum: 240 V acv Input kilovolt-amperes (kVA),approximately:– Minimum: 0.102 kVA– Maximum: 0.55 kVANotes:1. Power consumption and heat outputvary depending on the number andtype of optional features installed andthe power-management optionalfeatures in use.2. The sound levels were measured incontrolled acoustical environmentsaccording to the procedures specifiedby the American National StandardsInstitute (ANSI) S12.10 and ISO 7779and are reported in accordance withISO 9296. Actual sound-pressure levelsin a given location might exceed theaverage values stated because of roomreflections and other nearby noisesources. The noise emission levelstated in the declared (upper limit)sound-power level, in bels, for arandom sample of system.3. There is no keyboard connector ormouse connector on the server. Youcan connect a USB keyboard and USBmouse to the server by using the USBconnectors.Chapter 1. The System x3250 M3 server 7