5. Thread the cable through the Rope Clip and around an object that is not a partof or permanently secured to the building structure or foundation, and fromwhich it cannot be removed; then fasten the cable ends together with a lock.1 Rope Clip2 Bolt holes3 NutsWhat to do next:To work with another option, go to the appropriate section.Replacing the cover and connecting the cablesAfter working with options, you need to install any removed parts, replace thecover, and reconnect cables, including power cords and telephone lines. Also,depending on the option that is installed, you might need to confirm the updatedinformation in the Configuration/Setup Utility program.To replace the cover and connect cables to your computer:1. Ensure that all components have been reassembled correctly and that no toolsor loose screws are left inside your computer.2. Clear any cables that might impede the replacement of the cover.26 User Guide
