341E Safety Inspection GuideSafety InspectionsSafety devices to protect customers, operators, and service personnel frominjury are installed in all IBM 6400 printers. Use this inspection guide as an aidin identifying possible unsafe conditions in a 6400 series printer.Perform the inspection steps outlined in this guide before the normalinspection for Maintenance Agreement Qualification, or any time you areinstructed to make a safety inspection.If you find any unsafe conditions, determine the severity of the hazard andwhether or not you can continue the inspection without first correcting theproblem.NOTE: The correction of any unsafe condition is the customer’sresponsibility.PreparationYou must have completed the “Electrical Safety Training Course for IBMCustomer Engineers” (self-study course 77170 or existing level) to do theSafety Inspection.Have the following items available:•Electrical Safety for IBM Customer Engineers, Order No. S229-8124.• A Fluke** meter (P/N 8496278) or similar device for resistance andvoltage measurements.• An ECOS** Electrical Safety Tester (P/N 6339695) in the United States ora similar safety tester in other countries.For each safety check on the following pages, do the steps in the orderpresented. Do not omit any steps.
