Changing Configurations69Changing ConfigurationsConfiguration settings in the Configuration Editor can be changed two ways:• make the changes directly on the menu tree• use the Menu EditorNOTE: Normally, the factory default configuration cannot be changed.However, you can enable modification of the factory configuration.Select Edit Enable Factory Edit. It is strongly recommended thatyou donot modify the factory default configuration. If you choose tomodify the factory configuration, you should first upload it from theprinter, and then save it. This way, you will have a backup copy of thefactory configuration. To disable modification of the factoryconfiguration, select Edit Disable Factory Edit.Making Changes on Menu Tree1. Using the Displayed Configuration menu at the bottom of the window,click the drop-down arrow to choose the configuration to change.2. Expand the submenus until the configuration setting you want to changedisplays.3. Select the menu item you want to change. A selection box surrounds yourchoice. See Figure 52.Figure 52. Selecting a Menu Item4. Double-click an item to open the Menu Editor (page 70) for that item, oruse the < and > keys to toggle through the available options. SeeFigure 53. (You may change these keys in the printer database window:select File Preferences, then click the Configuration Editor tab.See page 27.)Figure 53. Toggling Through The Available Options
