IBM 783722U Installation And User Manual

Also see for x3400 M2 7836: Brochure & specs Product guide Manual

Contents

Select this choice to view or set the POST loader watchdog timer value.- Reboot System on NMIEnable or disable restarting the system whenever a nonmaskable interrupt(NMI) occurs. Enable is the default.- Commands on USB Interface PreferenceSelect this choice to enable or disable the Ethernet over USB interface onIMM.- Network ConfigurationSelect this choice to view the system management network interface port,the IMM MAC address, the current IMM IP address, and the host name;define the static IMM IP address, subnet mask, and gateway address;specify whether to use the static IP address or have DHCP assign the IMMIP address; save the network changes.- Reset IMM to DefaultsSelect this choice to view or reset IMM to the default settings.- Reset IMMSelect this choice to reset IMM.– System SecuritySelect this choice to view or configure Trusted Platform Module (TPM)support.– Adapters and UEFI DriversSelect this choice to view information about the UEFI 1.10 and UEFI 2.0compliant adapters and drivers installed in the server.– NetworkSelect this choice to view or configure the network device options, such asiSCSI, PXE, and network devices.Note: The configuration forms for UEFI 2.1 and greater compliant add-onnetwork devices might be located here.v Date and TimeSelect this choice to set the date and time in the server, in 24-hour format(hour:minute:second).This choice is on the full Setup utility menu only.v Start OptionsSelect this choice to view or boot to devices, including the startup sequence. Theserver starts from the first boot record that it finds.This choice is on the full Setup utility menu only.v Boot ManagerSelect this choice to view, add, delete, or change the device boot priority, bootfrom a file, select a one-time boot, or reset the boot order to the default setting. Ifthe server has Wake on LAN hardware and software and the operating systemsupports Wake on LAN functions, you can specify a startup sequence for theWake on LAN functions. For example, you can define a startup sequence thatchecks for a disc in the CD-RW/DVD drive, then checks the hard disk drive, andthen checks a network adapter.v System Event LogsSelect this choice to enter the System Event Manager, where you can view theerror messages in the system event logs. You can use the arrow keys to movebetween pages in the error log.108 System x3400 M2 Types 7836 and 7837: Installation and User’s Guide