IBM 783722U Installation And User Manual

Also see for x3400 M2 7836: Brochure & specs Product guide Manual

Contents

5. Disconnect the cables from the power supply to the system board and allinternal components. Be sure to make a note of the cable routing.Attention: Support the power supply while you remove the mounting screws.After the screws are removed, the power supply is loose and can damage othercomponents in the server.6. While you support the power-supply, remove the three screws from the pivotbracket that secure the power supply to the chassis; then, lift the power supplyoff the chassis. Save the screws to use when you install the replacement powersupply.7. If you are instructed to return the power supply, follow all packaging instructions,and use any packaging materials for shipping that are supplied to you.80 System x3400 M2 Types 7836 and 7837: Installation and User’s Guide