IBM Aptiva 2142 Hardware Maintenance Service

Also see for Aptiva 2140: Maintenance service manual Hardware maintenance service

Table 2-1 (Page 13 of 23). POST and Diagnostics and Utilities Indexfor Symptoms, Messages, Error Codes, or BeepsSymptoms, Messages, ErrorCodes, or BeepsAction/FRUThe Address Exceeds The SizeOf Your Memory.An invalid memory address wasentered. The Diagnostics Testsdisplay this message during theLocate Bad Chips option underthe interact menu if an invalidmemory address was entered atthe "Enter Memory Address OfBad Chip" prompt.Enter correct addressMemory ModuleSystem BoardThat Number is Out Of Range.An invalid bit number wasentered. Diagnostics Testsdisplay this message during theLocate Bad Chips option.Enter the correct number.Memory ModuleSystem BoardToo Many Errors - Test Aborted.Too many errors, the DiagnosticsTest cannot continue.ProcessorSystem BoardTransmit Error.Internal or external serial portloopback test failure.Serial Port CableSystem BoardVideo Adapter Failed.Test Result Summary, displayedif "Fail" was at the Quit/Fail/Passmenu of any video test.Video AdapterSystem BoardDisplayWrite error on cylinder n.Hard disk drive write error.Hard Disk DriveWrite Errors.Diskette drive write error.DisketteDiskette DriveSystem BoardDiskette Drive CableWrite Protected or UnformattedDiskette is Write Protected or notformatted.Insert a non-write protected, formatteddiskette into the diskette drive; then rerunthe test.Diskette DriveSystem BoardDiskette Drive CableCheck Procedures 2-23All manuals and user guides at all-guides.com