IBM Aptiva 2187 Service Manual

2-17Table 2-3 Error Symptoms ListError Symptoms Action/FRUNOTE: To diagnose a problem, first find the error symptom in the leftcolumn. If directed to a check procedure, replace the FRU indicated in thecheck procedure. If no check procedure is indicated, the first Action/FRUlisted in right column is the most likely cause.Diskette drive does not work. Make sure that the diskette drive is not set to[None] in the “Standard CMOS Setup” ofBIOS Setup.Diskette drive powerDiskette drive connection/cableDiskette driveSystem boardDiskette drive test failed. DisketteDiskette driveDiskette drive cableSystem boardHard Disk DriveNOTE: Ensure hard disk drive is configured correctly in BIOS Setup,cable/jumper are set correctly before diagnosing any hard disk driveproblems.Hard disk drive test failed. Load default settings.Hard disk drive cable.Hard disk drive.System board.Hard disk drive format error. Load default settings.Hard disk drive cable.Hard disk drive.System board.Hard disk drive write error. Load default settings.Hard disk drive.