Check Procedures 2-39007 -− Install the failing factory-installed adapter card in a different slot inthe riser card than where originally installed.008 - DOES THE FEATURE FUNCTION NORMALLY? (YES, GO TOSTEP 019. NO, READ AHEAD.− Power-off the system unit.− Check one adapter card at a time. To do this, install one adaptercard in the riser card and power-on the system unit.− Repeat this with each adapter card if necessary.009 - IS A WINDOWS 95 DRIVER ERROR DISPLAYED FOR THEINSTALLED ADAPTER CARD? (YES, READ AHEAD. NO,GO TO STEP 010)− Check for proper installation of the adapter card.− Check all adapter card jumper positions. See "System BoardLayout" on page 5-2.− Check all cables and connectors on the adapter card for properinstallation.− Check continuity of any cable attached to the adapter card andreplace if necessary.− If the problem remains, replace the factory-installed adapter card.− If the problem remains with a card that was not factory installed,consult the service information provided by the card manufacturer.− End010 -− Power-off the system unit.− Reinstall the adapter card and any cables.− Power-on the system unit without the Diagnostics Diskette inserted.− Perform the following when the system is running:Note: If an operating system other than Microsoft Windows 95 isinstalled, program screens and icons may differ from theseinstructions.1. Open Microsoft Windows 95 if not already opened by the system.2. Select the Start icon.
