6. Click Save settings and continue system server firmware boot to start the partitions.Starting a system or logical partition by using the HMCYou can use the Hardware Management Console (HMC) to start the system or logical partition after therequired cables are installed and the power cables are connected to a power source.Procedurev To power on the managed system, complete the following steps:1. In the navigation area, click the Resources icon , and then click All Systems.2. Select the system that you want to power on.3. In the content pane, click Actions > View All Actions > Power On.4. Click Finish.v To activate a logical partition, complete the following steps:1. In the navigation area, click the Resources icon , and then click All Partitions.2. Click the logical partition name that you want to activate.3. In the navigation area, click Partition Actions > Operations > Activate.4. Click Finish.v To activate a logical partition for a specific system, complete the following steps:1. In the navigation area, click the Resources icon , and then click All Systems.2. Click the system name in which you want to activate the logical partition.3. Select logical partitions that you want to activate.4. In the content pane, click Actions > Activate.5. Click Finish.v To verify that the logical partition start policy is set to User-Initiated, complete the following steps:1. In the navigation area, click the Resources icon , and then click All Systems.2. Click the system name to view details.3. In the navigation area, click Properties > Other Properties.4. Click the Power-On Parameters tab. Ensure that the Partition start policy field is set toUser-Initiated.Stopping a systemLearn how to stop a system as a part of a system upgrade or service action.36 Power Systems: System processor modules for the 9008-22L, 9009-22A, or 9223-22H
