v Automatic IPLThe Automatic IPL option determines whether the system automaticallystarts when the installation process has completed successfully.When TCP/IP successfully installs, either the Work with Licensed Programsmenu or the Sign On display appears.6. Select option 50 (Display log for messages) to verify that you have installed thelicensed program successfully. If an error occurs, you will see the message Workwith licensed program function not complete on the bottom of the Workwith Licensed Programs display.To use TCP/IP, you must configure it after you have completed the installation.See “Configuring TCP/IP using the EZ-Setup Wizard” on page 9.Using the TCP/IP Administration MenuThe TCP/IP Administration menu (Figure 1) is a starting point for theconfiguration tasks. To display the menu, enter GO TCPADM from the iSeriesMain Menu.Following are descriptions of the menu options.v Option 1. Configure TCP/IP: Displays the Configure TCP/IP menu. Use theoptions on this menu to configure your local server to communicate with othersystems in a TCP/IP network.v Option 2. Configure TCP/IP applications: Displays the Configure TCP/IPApplications menu. Use the options on this menu to configure the TCP/IPlicensed program (5769-TC1) applications installed on your system.v Option 3. Start TCP/IP: Select this option to issue the Start TCP/IP (STRTCP)command. This command initializes and activates TCP/IP processing, starts theTCP/IP interfaces, and starts the TCP/IP server jobs.v Option 4. End TCP/IP: Select this option to issue the End TCP/IP (ENDTCP)command. This command is used to end all TCP/IP processing on this system.TCPADM TCP/IP AdministrationSystem: RCSelect one of the following:1. Configure TCP/IP2. Configure TCP/IP applications3. Start TCP/IP4. End TCP/IP5. Start TCP/IP servers6. End TCP/IP servers7. Work with TCP/IP network status8. Verify TCP/IP connection9. Start TCP/IP FTP session10. Start TCP/IP TELNET session11. Send TCP/IP spooled file20. Work with TCP/IP jobs in QSYSWRK subsystemSelection or command===>F3=Exit F4=Prompt F9=Retrieve F12=CancelFigure 1. TCP/IP Administration Menu6 OS/400 TCP/IP Configuration and Reference V5R1
