Work with TCP/IP Interface StatusThe Work with TCP/IP Interface Status display, as shown in Figure 25, providesthe most current summary of interface activity. This display allows you to viewTCP/IP interface information for selected interfaces and to start or end TCP/IPinterfaces. To view the Work with TCP/IP Interface Status display, take these steps:1. Type 1 on the command line of the Work with TCP/IP Network Status menuor enter the WRKTCPSTS *IFC command.2. Press the Enter key.Press F11 to change the contents of the display to include the subnet mask, type ofservice, maximum transmission unit (MTU), and line type, as shown in Figure 26on page 35.Work with TCP/IP Network StatusSystem: SYSNAM04Select one of the following:1. Work with TCP/IP interface status2. Display TCP/IP route information3. Work with TCP/IP connection statusFigure 24. Work with TCP/IP Network StatusWork with TCP/IP Interface StatusSystem: SYSNAM04Type options, press Enter.5=Display details 8=Display associated routes 9=Start 10=End12=Work with configuration statusInternet Network Line InterfaceOpt Address Address Description Status9.125.87.10 9.125.87.0 TRNLINE Active9.125.87.222 9.125.87.0 TESTTRN Active127.0.0.1 127.0.0.0 *LOOPBACK ActiveBottomF3=Exit F4=Prompt F5=Refresh F11=Display line information F12=CancelF13=Sort by column F24=More keysFigure 25. Work with TCP/IP Interface Status, Display 1 of 234 OS/400 TCP/IP Configuration and Reference V5R1
