Statement 5:CAUTION:The power control button on the device and the power switch on the powersupply do not turn off the electrical current supplied to the device. The devicealso might have more than one power cord. To remove all electrical currentfrom the device, ensure that all power cords are disconnected from the powersource.12The server can be turned off in any of the following ways:v You can turn off the server from the operating system, if your operating systemsupports this feature. After an orderly shutdown of the operating system, theserver will be turned off automatically.v You can press the power-control button to start an orderly shutdown of theoperating system and turn off the server, if your operating system supports thisfeature.v If the operating system stops functioning, you can press and hold thepower-control button for more than 4 seconds to turn off the server.v If an optional Remote Supervisor Adapter II SlimLine is installed in the server, theserver can be turned off from the Remote Supervisor Adapter II SlimLine userinterface.v The integrated systems-management processor (mini-BMC) can turn off theserver as an automatic response to a critical system failure.v You can turn off the server through a request from the service processor.10 IBM System x3250 Types 4364 and 4365: User’s Guide
