IBM iSeries Series Analyze Hardware Problems (system Reference Codes

Also see for 270: User guide Service manual Hardware Problem Analysis and Isolation

Contents

laser safety information

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item69CF Abnormal or unexpected HSL OptiConnect disconnection from a remotesystem or partition.LIC internal error. All systems participating in HSL OptiConnect will bedisconnected. The system must be re-IPL’d to recover. Before re-IPL’ing thesystem initiate a main store dump.After getting the dump, examine the Service Action Log (SAL) on the localsystem or partition for HSL Opticonnect failures that occurred atapproximately the same time this error occurred.Examine the remote systems or partitions for problems. Examine theService Action Log (SAL) on the remote systems or partitions for HSLOpticonnect problems that occurred at approximately the same time thiserror occurred.Collect all the Product Activity Log information for this failure on allsystems and partitions on this HSL loop. Be sure to record all words in theSRCs. Contact your next level of support with the information you havecollected.AJDG30169D0 Bus Expansion Adapter card failedAn internal error was detected on a local optical link card.Perform BUS-PIP1.FI00182FI00055AJDG30169D8 Bus Expansion Adapter failedA primary optical link had a failure. Contact with the bus may still bepossible through this link or through a redundant link.Perform BUS-PIP1.For this reference code the failing item list presented in the ″Service ActionLog″ can be different from the failing item list documented here. That isdue to the differences in system models and features installed.If the ″Service Action Log″ is available then use the failing item listpresented there for servicing this reference code.If the ″Service Action Log″ is not available then use the failing item listdocumented here. By following the procedures in the symbolic FRUs listedhere you will isolate to the correct FRU list based on system model andfeatures installed.FI00182FI00203FI00055LBUSADPAJDG30169E0 Bus Expansion Adapter card failedAn internal error was detected on a remote bus adapter card.Perform BUS-PIP1.FI00203AJDG30169E8 Bus Expansion Adapter failedRedundancy has been lost due to a secondary optical link failure. Contactwith the bus may still be possible through the primary optical link.Perform BUS-PIP1.FI00203FI00205FI00057AJDG301B6xx (including A6xx)System Reference Codes 293