Cable fromPowerSubsystemConnectorCable toSubsystem(Processor orI/O LocationCode)PowerSubsystemCable PartNumberConnector DescriptionNotes:1. P10 connector is not used.2. Cable clamp (part number 11P4606) is used with all cables.3. Cable hook-and-loop fastener (part number 07H6655) is used with all cables.RIO CablesThe following table lists the cables used to connect the RIO or RIO-2 connectors on the processorsubsystem to the I/O subsystem input/output connectors.Part Number Description11P2355 RIO cable, 0.5 m (19.7 in.)53P5242 RIO to RIO-2 cable, 1.0 m (3.2 ft)53P5243 RIO to RIO-2 cable, 3.0 m (9.8 ft)11P0272 RIO cable, 2.0 m (6.6 ft)44H9137 RIO cable, 15.0 m (49.2 ft)00P5238 RIO-2 cable, 1.75 m (5.7 ft)00P5239 RIO-2 cable, 2.5 m (8.2 ft)21P5477 RIO to RIO-2 cable, 6.0 m (19.7 ft)53P5454 RIO-2 to RIO-2 cable, 1.0 (3.2 ft)53P2675 RIO-2 to RIO-2 cable, 8.0 m (26.2 ft)53P2676 RIO-2 to RIO-2 cable, 3.5 m (11.5 ft)HMC to Processor Subsystem CablesThe following table lists the cables used to connect the HMC to the processor subsystem.Part Number Cable Length Connector Description Type of Cable44P0205 6 m (19.7 ft) 9 Pin to 9 Pin RS 23244P0206 15 m (49.2 ft) 9 Pin to 9 Pin RS 23244P2237 6 m (19.7 ft) 25 Pin to 9 Pin mini D-Shell RS 42244P2238 6 m (19.7 ft) 25 Pin to 9 Pin mini D-Shell RS 42244P2239 (for BPC A) 15 m (49.2 ft) 25 Pin to 9 Pin mini D-Shell RS 42244P2240 (for BPC B) 15 m (49.2 ft) 25 Pin to 9 Pin mini D-Shell RS 422158 Eserver pSeries 655 Installation Guide
