Original bootcfg program outputBoot Loader Settings----------------------------timeout: 30default: multi(0)disk(0)rdisk(0)partition(1)\WINDOWSBoot Entries----------------Boot entry ID: 1OS Friendly Name: Windows Server 2003, StandardPath: multi(0)disk(0)rdisk(0)partition(1)\WINDOWSOS Load Options: /fastdetectModified bootcfg program outputBoot Loader Settings----------------------------timeout: 30default: multi(0)disk(0)rdisk(0)partition(1)\WINDOWSredirect: COM1redirectbaudrate: 19200Boot Entries----------------Boot entry ID: 1OS Friendly Name: Windows Server 2003, StandardPath: multi(0)disk(0)rdisk(0)partition(1)\WINDOWSOS Load Options: /fastdetect /redirectYou must restart the Windows 2003 operating system after completing thisprocedure for the changes to take effect and to enable SOL.Installing the OSA SMBridge management utility programComplete the following steps to install the OSA SMBridge management utilityprogram on a server running a Windows operating system:1. Go to http://www.ibm.com/support/ and download the utility program and createthe OSA BMC Management Utility CD.2. Insert the OSA BMC Management Utility CD into the drive. The InstallShieldwizard starts, and a window similar to that shown in the following illustrationopens.Chapter 3. Configuring the server 101