Chapter 2. Installing optionsImportant: Before you install optional hardware, make sure that the server isworking correctly. Start the server, and make sure that the operating system starts,if an operating system is installed, or that a 19990305 error code is displayed,indicating that an operating system was not found but the server is otherwiseworking correctly. If the server is not working correctly, see the ProblemDetermination and Service Guide for diagnostic information.This chapter provides detailed instructions for installing optional hardware devices inthe server.Server componentsThe following illustration shows the major components in the server (depending onthe server model). The illustrations in this document might differ slightly from yourhardware.BezelControl panel assemblyUSB cable assemblySAS/SATAbackplaneSATAbackplateFanassemblyHot-swap fanHot-swap power supplyFixed power supplyHot-swap power supply fillerPower supply cageHot-swapdriveHot-swapdrive trim pieceSimple-swapdriveSimple-swapdrive trim pieceDVDdriveDVD drivetrim pieceProcessor baffleServeRAID 8k-1VRMHeatsinkMicroprocessorSystem boardHeat sinkretention bracketCoverHeat sinkfillerDIMMsDrive bay EMC shieldHard disk driveEMC shieldDIMM air ductRear adapter retention bracket© Copyright IBM Corp. 2008 17