IC Realtime DVR-Flex4 Installation Manual

Contents

IC Realtime DVR-Flex4 Installation Manual Manual pdf 3 page image

© 2013 I-View Now, LLC. All Rights Reserved.ICRealtime Flex4/8/16E Installation Guide rev 1.0 Page 3Workflow1. Network Setup: Setting a Static IP, enabling external access via port forwardinga. LAN Setup: static IP address assigned by site IT staffb. Port Setup: forward ports to allow Device commands to be sent from I-View Now2. Configure SMTP email: This will be used to communicate alerts and alarms to I-View Now. The SMTP server andSMTP ID provided on the “Installer Data” Worksheet will be used here3. User Setup: Change the default administrator password. I-View Now will be using this password to log into thedevice. I-View Now suggests using the suggested password on the “Installer Data” worksheet.4. Recording Setup: The DVR will be set to record by schedule or by events. Event recording will only record wheneither a motion or alarm event is detected. Scheduled recordings occur during the scheduled time.5. Alarm Input Setup: Here the technician will be setting up the alarm inputs on the back of the DVR to performtwo actions: 1) Trigger recording on all connected cameras. And most importantly, 2) Send SMTP (email) alert toI-View Now upon the event of an alarm.6. Motion Detection Setup: activate video motion recording for desired cameras.7. Configure I-View Now Entry Delay: Entry delay is configured through the I-View Now portal.8. Test: Here you will test the individual inputs on the DVR as they are connected to your alarm panel relays orother input devices. It is recommended that you test all inputs for functionality and to ensure the properconfiguration has been setup in the I-ViewNow portal.9. Trouble Shooting: This section is provided to help the technician troubleshoot common problems encounteredwhile installing S series DVR’s.