IC Realtime DVR-Flex4 Installation Manual

Contents

IC Realtime DVR-Flex4 Installation Manual Manual pdf 7 page image

© 2013 I-View Now, LLC. All Rights Reserved.ICRealtime Flex4/8/16E Installation Guide rev 1.0 Page 7SMTP SettingsThis section describes how to set up SMTP (email) on the DVR to allow Alarm notifications to be sent to I-View Now. Navigate back to the general network settings interface Under the advanced settings submenu use the scroll barto scroll down to EMAIL. Double click EMAIL to enter EMAIL setup Enter ivnview.com for the SMTP server Enter 3480 for the Port For Sender, Enter the SMTP ID from the Installer’sWorksheet. For Receiver, Enter the SMTP ID from the Installer’sWorksheet. Yes, Sender and Receiver are the same Ensure Enable SSL is NOT Checked Set Event interval to 5 Click Test Click OKTest Failure can occur if the SMTP Server, SMTP Port,SSL/TLS, DNS, or Firewall settings are incorrect. ThisTest will not verify that the Sender and Receiver arecorrect. It just verifies connectivity to the I-View NowSMTP Server.Network settings can be reachedfrom the settings menuEmail Setup Interface. Reachable throughNetwork Settings interface