IC Realtime DVR-Flex4 Installation Manual

Contents

IC Realtime DVR-Flex4 Installation Manual Manual pdf 4 page image

© 2013 I-View Now, LLC. All Rights Reserved.ICRealtime Flex4/8/16E Installation Guide rev 1.0 Page 4Installation WorksheetThe I-View Now Portal will provide an Installation Worksheet after entering the DVR make and model into the system.This sheet will contain configuration information for the DVR’s notifications area, and provides a form to fill in detailsabout the site setup (alarms, zone names). An example worksheet is printed below.You will need to retrieve the IP address while on-site. Either ask the customer/IT department for the IP address, or visithttp://whatismyip.org while on-site for the correct address.Default DVR LoginPlug a monitor into the VGA output on the DVR. Also, plug the mouse provided with the DVR into the front side USB portof the DVR unit. The default password is admin. Be aware that the Menu’s presented in this manual can vary slightlydepending on the exact model and firmware version.User Name: adminPassword: adminUSB Mouse VGA Cable VGA Port