ICP DAS USA I-7088 User Manual

Also see for I-7088: User manual

ICP DAS USA I-7088 User Manual Manual pdf 70 page image

I-7088I-7088 User Manual, Rev: A1.0702.38. ~AADVVDescription:This command is used to set the miscellaneous settings.Syntax:~AADVV[CHKSUM](CR)~ Delimiter characterAA The address of the module to be set (00 to FF)D The command to set the miscellaneous settingsVV A two-digit hexadecimal value, where bit 0corresponds to the active status of the DI as indicatedbelow.The other bits are reserved.0: Input value 1 for non-signal or low voltageInput value 0 for high voltage1: Input value 1 for high voltageInput value 0 for non-signal or low voltageResponse:Valid Command: !AAVV[CHKSUM](CR)Invalid Command: ?AA[CHKSUM](CR)! Delimiter character for a valid command? Delimiter character for an invalid commandAA The address of the responding module (00 to FF)There will be no response if the command syntax is incorrect,there is a communication error, or there is no module with thespecified address.