102D.7 The Controller Events WindowThis window shows the history of the events that occurred since the log was cleared the lasttime. The first column in this window contains icons representing the severity of the events:Icon DescriptionInformation: This event is not critical. It only informs the system admin-istrator about certain events, like the completion of an array build.Warning: This event is critical an may not be ignored. It occurs for exam-ple if an Array Drive's state changes from ready to fail.Error: An error occurred. This might be the failure of a drive.The second column lists how often this event occurred. Some events may occur quite often,so this counter helps to keep an overview. The next column lists the date and the timewhen the event occurred. The last column describes the event. At the bottom of the windowthere is the Settings button. Here you can change the polling interval and enable the autosave function. Logs that are not saved on the hard disk are lost when the system is reset.The auto save function saves the current log in the time intervals selected there. The de-fault name for this logfile is ‘gdtevt.evt’. The Save As button allows you to write the con-tents of the event log to a specific file on the hard disk. The Load button loads an olderevent log and displays it. The last two buttons delete the log file and clear the event bufferon the ICP Controller.
