47 „Save Information“ creates a completeprotocol file of the current RAID sub-system including all settings of the ICPController and the drives. This file canbe used for documentary reasons or forremote diagnosis. „Configure Array Drives“ allows you toconfigure or create Array Drives. With „Configure Host Drives“ you caneither configure already existing HostDrives, or create new ones. I.e., you cancreate under normal operation newHost Drives without shutting down thecomputer. The „Repair Array Drives“ menu offersvery powerful menu-guided functions torepair Array Drives which have faileddrives.C.3 The Menu MonitorC.3.1 Menu Monitor: View StatisticsIn each of these menus, ICPCON displays the performance of the drives of the correspond-ing level of hierarchy. The throughput of the drives is displayedin KB/s (KiloBytes per second) and IO/s (I/Os per second,number of IO’s on the controller). The performance figuresreflect the load being on the controller and not necessarily themaximum performance the controller can deliver.After selecting one of the Drives Statistics ICPCON displays a list of all Drives of this level(for this example the Physical Drives, i.e., level 1). In addition to the performance report onthe Drives, you are given additional information on each device. The ICP I/O channel thehard disk is connected to, which ID the hard disk has, the name of the hard disk, the gross
