78D.3 Select ControllerThis window is used to select anICP Controller for all further ac-tions within the ICP RAID Naviga-tor.In a first step you should selectthe desired protocol (WindowsNT/95/98, Sockets, IBM NetBIOS)for the communication betweenthe ICP RAID Navigator and thesystem which is equipped with theICP Controller by double clickingon the protocol icon on the veryleft side of the window. If you wantso select an ICP Controller viaTCP/IP (sockets), type in the corre-sponding TCP/IP address or theserver system’s name. You arethen asked to enter a user nameand a password. This information is transmitted with encryption.After the protocol was selected, select the system whichcontains the ICP Controller and afterwards the ICP Control-ler itself. The selection and de-selection is done by doubleclicking on the ICP Controller.The selected protocol, systemand ICP Controller are shown ina dashed yellow frame.No more action can be done inthis menu.D.4 Physical Configuration WindowThis window shows the physical configuration of the SCSI or Fibre Channelbusses of the selected ICP Controller and the devices connected with thesebusses. The complete configuration is shown as a tree starting from the leftwith the ICP Controller.To get detailed information on the single devices, double click on the icons.The windows that open, depend on the type of the selected device.To change the physical configuration of the devices, click the right mouse button on thedesired device or select the corresponding item from the Configuration menu.Possible choices are (Click on the popup menu items to get information on them):
