WEB S ERVER CPU MODULE U SER ’S MANUAL FC9Y-B1278 8-58: E THERNET USER COMMUNICATIONUser Communication ServerWhen a server connection is configured as the user communication server, a client device can access and communicatewith the Web server CPU module. The Web server CPU module communicates with the client device according to thesettings configured in the ETXD and ERXD instructions that are programmed for the server connection. The local hostnumber and other communication settings can be configured in the Connection Settings tab in the Function AreaSettings dialog box.Specifications (User Communication Server)User Communication Server Receive Instruction (ERXD) Cancel FlagThe allocation of the user communication receive instruction cancel flags for each server connection is shown in thetable below. For details about the user communication receive instruction cancel flag, see chapter 10 of the FC5A user’smanual basic volume.Item User Communication ServerLocal host port number 2102 to 2109 (Can be changed between 0 and 65535)Number of clients that can simultaneouslycommunicate with the CPU moduleOne client per a user communication serverReceive timeout 10 ms to 2550 ms (10 ms increments)Device Address DescriptionM8200 User Communication Receive Instruction Cancel Flag (Server Connection 1)M8201 User Communication Receive Instruction Cancel Flag (Server Connection 2)M8202 User Communication Receive Instruction Cancel Flag (Server Connection 3)M8203 User Communication Receive Instruction Cancel Flag (Server Connection 4)M8204 User Communication Receive Instruction Cancel Flag (Server Connection 5)M8205 User Communication Receive Instruction Cancel Flag (Server Connection 6)M8206 User Communication Receive Instruction Cancel Flag (Server Connection 7)M8207 User Communication Receive Instruction Cancel Flag (Server Connection 8)Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
