HDC-UHD Series User Guide749.8.4 Downconversion outputThe HDC can downconvert 2160p into 1080p. Only OUT1 supports this feature.Menu C40: OUT1WEB menu OUTPUT SETTINGS → DOWN CONVERSIONSetting value[Table 9.36] DownconversionSetting Front WEB browserAutomatic* [Default] FoL FOLLOW SINK EDIDDisabling oFF OFFEnabling on 1080p*Automatic: If the sink device supports only up to 2K, signals are downconverted automatically.[Table 9.37] Downconverted resolutionInput resolution Converted resolution3840x2160p 24Hz 1920x1080p 24Hz3840x2160p 25Hz 1920x1080p 25Hz3840x2160p 30Hz 1920x1080p 30Hz3840x2160p 50Hz 1920x1080p 50Hz3840x2160p 60Hz 1920x1080p 60Hz9.8.5 HDBaseT output long reach modeYou can enable/disable long reach mode for HDBaseT output.Menu C45 to C48: OUT2 to OUT5WEB menu OUTPUT SETTINGS → HDBT LONG REACH MODESetting value[Table 9.38] HDBaseT output long reach modeSetting Front WEB browserDisabling (Up to 328 ft. (100 m)) [Default] oFF OFFEnabling (Up to 492 ft. (150 m)) on ONWith long reach mode, up to 1080p (24 bit)/dot clock 148 MHz is supported when using with IDK’s HDBaseTproduct.
