IDK NJR-T01UHD User Manual
Also see for NJR-R01UHD: Command reference guideCommand reference guide
                                                              | |
Contents
| 
NJR-T01UHD / NJR-R01UHD User’s Guide49* EDID supported pixel of 1360 x 768 and 1366 x 768 can be set in “10.4.3 Selecting WXGA mode”.The default value is 1360 x 768.Communication command@SVF Setting EDID resolution@GVF Getting EDID resolution10.4.2 Copying EDIDEDID of the sink device connected to NJR-T01UHD or NJR-R01UHD can be loaded and registered, and thecopied EDID can be treated in the same way as the internal EDID.In order to copy the EDID of the sink device connected to NJR-R01UHD, set this item from the IP-NINJARConfigurator or NJR-CTB.Communication command@RME Copying EDID【See: 9.2 IP-NINJAR Configurator (Setting software for IP-NINJAR)】【See: 9.3 Control over NJR-CTB (Control box for IP-NINJAR)】Note:To use a registered EDID, set “10.4.1 Setting EDID resolution“ to Copied EDID.10.4.3 Selecting WXGA modeYou can set the WXGA pixel (1360x768 or 1366x768) depending on the resolution of EDID.This setting is enabled if selecting an item other than copied EDID.Setting value1360x768 [Default]1366x768Communication command@SWX Setting WXGA mode@GWX Getting WXGA modeNJR-T01UHDNJR-T01UHD |
Related manuals for IDK NJR-R01UHD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine