IDK NJR-T01UHD User Manual

Also see for NJR-R01UHD: Command reference guide Command reference guide

Contents

IDK NJR-T01UHD User Manual Manual pdf 50 page image

NJR-T01UHD / NJR-R01UHD User’s Guide5010.4.4 Deep ColorYou can set the color depth that is output from the source device.Setting value24-BIT COLOR [Default]30-BIT COLOR36-BIT COLORNote:If you select “30-BIT COLOR” or “36-BIT COLOR”, the transmission clock speed increases. Noise may occurif a bad-quality cable or long cable is connected. In these cases, the noise may be removed by selecting“24-BIT COLOR”.For 4K@50 / 59.94 / 60 (YCbCr 4:4:4), “24-BIT COLOR” is selected automatically regardless of this menu’ssetting.Communication command@SDI Setting Deep Color input@GDI Getting Deep Color input10.4.5 Audio formatYou can set the audio format and maximum sampling frequency to be output from a source device.Note:Some formats are not supported; select an audio format and sampling frequency that are supported by thedevice you use.Setting value[Table 10.4] Audio formatsAudio format Max. sampling frequency (kHz)PCM 32 / 44.1 / 48* / 88.2 / 96 / 176.4 / 192Dolby Digital OFF* / 32 / 44.1 / 48AAC OFF* / 32 / 44.1 / 48 / 88.2 / 96Dolby Digital+ OFF* / 32 / 44.1 / 48DTS OFF* / 32 / 44.1 / 48 / 96DTS-HD OFF* / 44.1 / 48 / 88.2 / 96 / 176.4 / 192Dolby TrueHD OFF* / 44.1 / 48 / 88.2 / 96 / 176.4 / 192* Default valueCommunication command@SAF Setting audio format@GAF Getting audio formatNJR-T01UHDNJR-T01UHD