NJR-T01UHD / NJR-R01UHD User’s Guide5610.7.2 Output statusYou can display the status of the sink device connected to the HDMI output connector.Displaying information[Table 10.13] HDCP authenticationValue to be displayed DescriptionHDCP 1.4 SUPPORT HDCP 1.4 authorized.HDCP 2.2 SUPPORT HDCP 2.2 authorized.HDCP NOT SUPPORT Not authorized because sink device that does not support HDCP isconnected or input signal does not have HDCP.HDCP ERROR The sink device that supports HDCP is connected, but authenticationfailed.HDCP CHECK NOW The sink device status is checking. e.g. When sink device status ischanged, this message is displayed.UNCONNECTED A sink device is not connected.[Table 10.14] Output signalValue to be displayed DescriptionHxx HDMI signal is output.xx: color depth(24, 30, or 36)D DVI signal is output.N A sink device is not connected.[Table 10.15] Error codeHDMI output connector status of video output is displayed and then the status of audio output is displayed.Value tobedisplayedVideo output Audio output0 Video is output correctly. Audio is output correctly.1 - “10.3.1 Muting digital audio” is set to “ON”.2 No source device is connected.3 Video signal is not input. Audio signal is not input.4 Video or audio output of the source device is muted.5 Signal with HDCP is input, but the sink device does not support HDCP.6 The source device does not output necessary data (packet) for video or audio output.7 Signal that is not supported byNJR-T01UHD / NJR-R01UHD is input.Audio cannot be output, becausecompressed audio is input.9 - A sink device that is not supported by audiois connected.B No sink device is connected.C HDCP is being authorized.D HDCP authentication failed.NJR-T01UHD / NJR-R01UHD