IDS 1632 User Manual

Also see for 1632: User manual Installer manual

16IDS 1632 User Manual 700-256-01I Issued March 2009Table 1 : User Programming OptionsOptions Summary of Programmable OptionsOption 0 Allows for the addition of new user codes.Option 1 Allows editing of the user name displayed by LCD keypads.This option is only applicable if LCD keypads are installed.Option 2 Allows editing of a selected user code.Note that the user code properties are not edited, only the user code itself.Option 3 Allows viewing of the user code slot number for a selected code.There are 250 available user code slots.Option 4 Allows editing of the user code properties for a selected user code.This is a bit mapped menu.Option 5 Allows the allocation of a selected user code to designated partitions.This is a bitmapped menu.Option 8 Adding User RemotesOption 9 Deleting a USER CODEOption 10 Allows the deletion of a user code using the user code slot number.Option 11 Allows viewing of a user name if the slot number is known.Option 12 Add user by slot number14. Explanation of Programmable Options14.1 Add a New User Code – Option 0Hold down the [*] key until the beep,then enter [MASTER CODE] [*] [0] [*] [New USER CODE] [*]1. Enter the User Program Mode as per steps 1 to 4 on page 15.2. Press the [0] key followed by the [*] key to select the programmable option 0 (zero). The Readyand Armed indicators will flash simultaneously.3. Enter the [New USER CODE] followed by the [*] key.4. Further codes may be added by repeating step 3 above.5. After entering the last code press the [#] key to exit the user program mode.14.2 Edit a User Name – Option 1 (LCD Keypads only)Hold down the [*] key until the beep,then enter [MASTER CODE] [*] [1] [*] [User Name] [*]1. Enter the User Program Mode as per steps 1 to 4 on page 15.2. Press the [1] key followed by the [*] key to select programmable option The Armed indicator willflash.3. Enter the [USER CODE] of the User whose name you wish to edit.4. User Names are displayed as the User Slot Number by default. Edit the User Number so that itreads the correct User Name. To confirm the entry press [*].5. Repeat steps 3 to 4 until you have edited all the names you require and then press [#] to exit.