IDS 1632 User Manual

Also see for 1632: User manual Installer manual

19IDS 1632 User Manual 700-256-01I Issued March 200914.5.1.4 Group Arm CodeThis code when entered will arm the partitions assigned to the user depending on their status. If allpartitions are disarmed, entering a group code will arm all of the assigned partitions. In a case wheresome partitions are armed and others disarmed, entering this group code at the keypad of the disarmedpartition will arm the disarmed partitions only.14.5.1.5 Group Disarm CodeThis code when entered will disarm the partitions assigned to the user depending on their status. If allpartitions are armed, entering a group code will disarm all of the assigned partitions. In the case wheresome partitions are disarmed and others armed, entering this group code at the keypad of the armedpartition will disarm the armed partitions only.14.5.1.6 Arm CodeCodes having this property, when entered, will arm the partition – as long as this code is associated withthis the current partition.14.5.1.7 Disarm CodeCodes having this property, when entered, will disarm the partition – as long as this code is associatedwith this the current partition.14.5.1.8 Report Open and CloseThis option enables reporting of a pre-programmed reporting code when a partition assigned to this useris armed/disarmed.14.5.1.9 User Phone in AccessIf enabled this allows the user to arm or disarm the panel using a DTMF telephone.14.5.1.10 Report User AccessCodes with this property enabled will cause the Alarm Panel to send a User Access Report Code to theSecurity Company every time these users enter their code.