IEI Technology AFL-HM55 Series User Manual

Also see for AFL-HM55: User manual

Contents

AFL-HM55 Series Panel PCPage 69Î Legacy USB Support [Enabled]Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboardsupport. Normally if this option is not enabled, any attached USB mouse or USB keyboarddoes not become available until a USB compatible operating system is fully booted with allUSB drivers loaded. When this option is enabled, any attached USB mouse or USBkeyboard can control the system even when there is no USB driver loaded onto thesystem.Î Disabled Legacy USB support disabledÎ Enabled D EFAULT Legacy USB support enabledÎ Auto Legacy USB support disabled if no USB devices areconnected5.3.6 Super IO ConfigurationUse the Super IO Configuration menu (BIOS Menu 8) to set or change theconfigurations for the FDD controllers, parallel ports and serial ports.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedSuper IO ConfigurationSuper IO Chip Finteck F81865> Serial Port 0 Configuration> Serial Port 1 Configuration> Serial Port 2 Configuration> Parallel Port ConfigurationSet Parameters of SerialPort 0 (COMA)---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 8: Super IO Configuration