AFL-W10A-N270 User ManualPage 124Step 10: Eject the One Key Recovery CD and restart the system.Step 11: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.Step 12: Enable the Auto Recovery Function option (Advanced iEi Feature AutoRecovery Function).BIOS SETUP UTILITYMain Advanced PCIPNP Boot Security Chipset ExitiEi FeatureAuto Recovery Function [Enabled]Recover from PXE [Disabled] Select Screen Select ItemEnter Go to SubScreenF1 General HelpF10 Save and ExitESC Exitv02.61 ©Copyright 1985-2006, American Megatrends, Inc.BIOS Menu 21: IEI FeatureStep 13: Save changes and restart the system. If the system encounters a Blue Screen ofDeath (BSoD) or a hang for around 10 minutes, it will automatically restore fromthe factory default image. Step 0:B.4 Setup Procedure for LinuxThe initial setup procedure for Linux system is mostly the same with the procedure forMicrosoft Windows. Please follow the steps below to setup recovery tool for Linux OS.Step 1: Hardware and BIOS setup. Refer to Section B.2.1.Step 2: Install Linux operating system. Make sure to install GRUB (v0.97 or earlier)MBR type and Ext3 partition type. Leave enough space on the hard drive tocreate the recover partition later.
