AFL-W10A-N270 User ManualPage 70 S.M.A.R.T [Auto]Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis andReporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predictsimpending drive failures. The S.M.A.R.T BIOS option enables or disables this function. Auto D EFAULT BIOS auto detects HDD SMART support. Disabled Prevents BIOS from using the HDD SMART feature. Enabled Allows BIOS to use the HDD SMART feature 32Bit Data Transfer [Enabled]Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers. Disabled Prevents the BIOS from using 32-bit data transfers. Enabled D EFAULT Allows BIOS to use 32-bit data transfers on supportedhard disk drives.4.3.3 Super I/O ConfigurationUse the Super I/O Configuration menu (5BIOS Menu 6) to set or change theconfigurations for the FDD controllers, parallel ports and serial ports.BIOS SETUP UTILITYMain Advanced PCIPNP Boot Security Chipset Power ExitConfigure Super I/O ChipsetSerial Port1 Address [3F8/IRQ4]Serial Port1 Mode [Normal]Serial Port3 Address [3E8]Serial Port3 IRQ [11]Select RS232 or RS422/RS485 [RS232]Serial Port4 Address [2E8]Serial Port4 IRQ [10]Allows BIOS to selectSerial Port BaseAddresses Select Screen Select ItemEnter Go to SubScreenF1 General HelpF10 Save and ExitESC Exitv02.61 ©Copyright 1985-2006, American Megatrends, Inc.BIOS Menu 6: Super IO Configuration
