AFL-W19A/W19B/17D/W15A-N270 Panel PCPage 55 Auto D EFAULT BIOS auto detects the PIO mode. Use this value if the IDE diskdrive support cannot be determined. 0 PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s 1 PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s 2 PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s 3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s 4 PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s(This setting generally works with all hard disk drivesmanufactured after 1999. For other disk drives, such as IDECD-ROM drives, check the specifications of the drive.) DMA Mode [Auto]Use the DMA Mode BIOS selection to adjust the DMA mode options. Auto D EFAULT BIOS auto detects the DMA mode. Use this value if the IDEdisk drive support cannot be determined. SWDMA0 Single Word DMA mode 0 selected with a maximum datatransfer rate of 2.1 MB/s SWDMA1 Single Word DMA mode 1 selected with a maximum datatransfer rate of 4.2 MB/s SWDMA2 Single Word DMA mode 2 selected with a maximum datatransfer rate of 8.3 MB/s MWDMA0 Multi Word DMA mode 0 selected with a maximum datatransfer rate of 4.2 MB/s MWDMA1 Multi Word DMA mode 1 selected with a maximum datatransfer rate of 13.3 MB/s MWDMA2 Multi Word DMA mode 2 selected with a maximum datatransfer rate of 16.6 MB/s UDMA0 Ultra DMA mode 0 selected with a maximum data transferrate of 16.6 MB/s
