IEI Technology AFL-W19A User Manual

Also see for AFL-17D: User manual User manual

Contents

AFL-W19A/W19B/17D/W15A-N270 Panel PCPage 68 Disabled D EFAULT Remote access is disabled. Enabled Remote access configuration options shown belowappear:Serial Port NumberSerial Port ModeFlow ControlRedirection after BIOS POSTTerminal TypeVT-UTF8 Combo Key SupportThese configuration options are discussed below. Serial Port Number [COM1]Use the Serial Port Number option allows to select the serial port used for remoteaccess. COM1 D EFAULT System is remotely accessed through COM1 COM2 System is remotely accessed through COM2NOTE: Make sure the selected COM port is enabled through the Super I/O configurationmenu. Base Address, IRQ [2F8h,3]The Base Address, IRQ option cannot be configured and only shows the interruptaddress of the serial port listed above. Serial Port Mode [115200 8,n,1]Use the Serial Port Mode option to select baud rate through which the console redirectionis made. The following configuration options are available 115200 8,n,1 D EFAULT 57600 8,n,1 38400 8,n,1