IMB-H810-i2 microATX MotherboardPage 975.3.8.1 Smart Fan Mode ConfigurationUse the Smart Fan Mode Configuration submenu (BIOS Menu 13) to configure smartfan temperature and speed settings.Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.AdvancedSmart Fan Mode ConfigurationCPU_FAN1 Smart Fan Control [Auto Mode]Fan start temperature 50Fan off temperature 40Fan start PWM 30Fan slope PWM 1SYS_FAN1 Smart Fan Control [Auto Mode]Fan start temperature 50Fan off temperature 40Fan start PWM 30Fan slope PWM 1Smart Fan Mode Select---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter Select+ - Change Opt.F1 General HelpF2 Previous ValuesF3 Optimized DefaultsF4 Save & ExitESC ExitVersion 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.BIOS Menu 13: Smart Fan Mode ConfigurationÎ CPU_FAN1 Smart Fan Control/SYS_FAN1 Smart Fan Control [Auto Mode]Use the CPU_FAN1 Smart Fan Control/SYS_FAN1 Smart Fan Control option toconfigure the CPU/System Smart Fan.Î Manual Mode The fan spins at the speed set in Manual Modesettings.Î Auto Mode D EFAULT The fan adjusts its speed using Auto Modesettings.Î Fan start/off temperatureUse the + or – key to change the Fan start/off temperature value. Enter a decimalnumber between 1 and 100.